Table of Contents
Advertisement
X PARITY
Meaning: Parity Error. The 3708 detected a parity error in the data
coming from the terminal. If the type-ahead key queuing function is on, the
3708 purges all characters that follow the character with the parity error.
Action: Press the Reset key sequence defined for the terminal and enter the
data again.
X FRAME
Meaning: Frame Error. The 3708 detected a framing error on data from
the terminal. If the type-ahead key queuing function is on, the 3708 purges
all characters following the character with the parity error.
Action: Press the Reset key sequence defined for the terminal and enter the
data again.
XOVRFLO
Meaning: 3708 Receive Queue Overflow. The receive queue can overflow
when the following conditions occur:
• The host response time is very slow
• The 3708 is sending data too fast (for example, doing file transfer
applications).
Action: Press the Reset key sequence defined for the terminal and enter the
data again.
XSTATLN
Meaning: Status Line Required for IDENT. The 3708 requires the status
line to be on before assigning printers.
Action: Press the Reset key sequence defined for the terminal, turn on the
3708 status line, and try the IDENT function again.
X WAIT
Meaning: Wait for the 3708 to finish. The 3708 displays this message when
you initiate a host data transfer while the 3708 is in slowdown mode. This
condition occurs when the 3708 runs low on buffer space because of
overloading.
Action: Press the Reset key sequence defined for the terminal. Continue to
enter data characters, or try an Enter function. If the slowdown condition
has been cleared, the data is sent to the host.
X HOST
Meaning: An upstream link has recorded a Receiver Not Ready (RNR)
from host. The host is temporarily unable to accept more data.
Action: Press the Reset key sequence defined for the terminal and try the
function again.
Chapter 2. Operating in Full-Screen Mode
2-15
Advertisement
Table of Contents
