Esd Warning; Revision History - Connect Tech NVIDIA Jetson TX2 User Manual

ESD Warning

Revision History

Revision
0.00 2017-03-10
0.01 2017-03-23
0.02 2017-07-11
0.03 2017-08-09
0.04 2017-08-09
0.05 2017-08-10
0.06 2017-08-29
0.07 2017-12-06
0.08 2017-12-06
0.09 2018-01-11
0.10 2018-03-08
0.11 2018-03-26
0.12 2018-05-16
0.13 2018-07-30
0.14 2018-11-13
Document: CTIM-00153
Revision: 0.14
Date
Initial Release
Updated Block Diagram
Updated image, added cable drawing links
Additional Info Added
Mechanical Added
Software/Switch info added
Fan connector info added
PSU info added
USB and GPIO info edit
Revised cable information
Added GPIO KDB link
Further GPIO info added
SIM Info Added
Added TX2i compatibility
Updated Cables
Page 6 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Spacely Carrier for NVIDIA® Jetson™ TX2/TX2i/TX1
Electronic components and circuits are sensitive to
ElectroStatic Discharge (ESD). When handling any circuit
board assemblies including Connect Tech carrier
assemblies, it is recommended that ESD safety
precautions be observed. ESD safe best practices include,
but are not limited to:

Leaving circuit boards in their antistatic packaging
until they are ready to be installed.

Using a grounded wrist strap when handling circuit
boards, at a minimum you should touch a grounded
metal object to dissipate any static charge that may be
present on you.

Only handling circuit boards in ESD safe areas, which
may include ESD floor and table mats, wrist strap
stations and ESD safe lab coats.

Avoiding handling circuit boards in carpeted areas.

Try to handle the board by the edges, avoiding contact
with components.
Changes
Users Guide
www.connecttech.com
Date: 2018-11-13