Testing Your E-Fence 3500 Prior To Installation; Installation - Dogtra E-Fence 3500 Owner's Manual

Testing Your Dogtra E-Fence 3500 Prior
to Installation
into sleep mode.
up. Place the test lamp over the contact points and approach
the test loop.
5. Watch for the test lamp to come on and the unit to vibrate.
46
1. To ensure that your E-Fence
adaptor into the transmitter
knob to Pager + Stimulation,
or Pager Only. The On/Off
indicator light should turn on.

Installation

Fence Wire
your property for the system to operate. The signal is delivered from
47