Philips LX9000R/25S User Manual page 64

Troubleshooting
Problem
The picture is distorted or
black-and-white during playback
No sound signal at the digital output
DVD+RW disc does not play on other
DVD players
Other disc errors
64
Solution
– The TV system of the inserted disc does not match the TV system of your TV
(PAL/NTSC).
– Switch the following setting in the system menu: t Picture - SCART
video - switch to RGB
– Check if the sound settings match the selected inputs and the connected
additional appliances.
– If you inserted an MP3-CD, the digital output is switched off during playback.
This is in accordance with the SDMI (Secure Digital Music Initiative) and is
not a defect of your DVD recorder system.
– If a recording is too short, it is possible that a DVD player cannot detect it.
Please pay attention to the following minimum recording times depending on
the different recording modes: HQ: 5 minutes, SP: 10 minutes,
SP+: 13 minutes, LP: 15 minutes, EP: 20 minutes, EP+: 30 minutes
– On some DVD players DVD+RW recordings cannot be played.You can use
the following special function to solve this problem for certain DVD players.
However, please note that there is a risk that you can no longer play
the DVD+RW disc on other DVD players after this procedure.Therefore
apply this function with particular care.
Press OPEN/CLOSE / on the set to open the drawer.
1
2
Insert the disc in the tray, but do not close the tray.
3
Press the numerical key 2 on the remote control until the tray closes.
The disc is modified.
If this fails to produce the desired result, repeat the procedure pressing the
0 0
numerical key 3 on the remote control.
To restore the disc to its original condition press the numerical key 1 on
0 0
the remote control.
– If playback of a DVD+RW disc is not possible at all, you can try to repair it
for new recordings. All existing recordings on the DVD+RW disc will be
deleted.
1
Clean the DVD+RW disc.
Press OPEN/CLOSE / on the set to open the drawer.
2
3
Insert the DVD+RW disc in the tray, but do not close the tray.
4
Keep CLEAR on the remote control pressed until the tray closes.
The DVD+RW is repaired for new recordings.