Connecting Additional Video Appliances; Connecting Additional Audio Appliances; Analogue Connections; Digital Connections - Philips LX9000R/25S User Manual

Connecting ...
Connecting additional video
appliances
You can connect several video appliances with a SCART
socket to EXT2 AUX I/O by connecting them in a "chain":
In the illustration below, a satellite receiver is connected to
a VCR and the VCR to the DVD recorder system.
Please keep in mind that the appliance closest to the
DVD recorder system will provide the input signal if several
appliances in the chain are switched on.Therefore:When
selecting a video appliance connected to EXT2 AUX I/O,
make sure that all other appliances connected to
EXT2 AUX I/O are switched off or to standby.
Consult the user´s manuals of the video appliances you
wish to connect on which SCART sockets are available and
how to connect them to other video appliances.
TV
ANTENNA IN
MW
TV ANTENNA
IN AUX I/0
TV OUT
TO TV I/0
VCR
TV OUT
ANTENNA
SAT Receiver
1
Connect the SCART socket of a video appliance to
EXT2 AUX I/O on the DVD recorder system with a
SCART cable. If the appliance has several SCART sockets,
use the one labelled TO TV or similar.
Note: Use RGB capable SCART cables only. Some other SCART
cables are only partially wired, resulting in a moderate picture
quality and less functionality of the SCART connection.
2
Connect another video appliance to the free SCART
socket on the video appliance which is already connected
to the DVD recorder system.
3
If a digital video appliance (e. g. satellite receiver or game
console) supports digital surround sound, connect either
– the digital coaxial output of the appliance to DIGITAL IN
on the DVD recorder system with a digital cinch cable,
– the digital optical output of the appliance to
OPTICAL IN on the DVD recorder system with a digital
optical cable.
14
EXT IN
RADIO
MAINS
FM
EXT 2
LINE IN 1 LINE IN 2 LINE OUT DIGITAL OUT
L L
EXT 1 R R
DIGITAL IN
OPTICAL IN
TO TV EXT. IN
TO TV
OPTICAL
OUT
Connecting additional audio
appliances
Please consult the user´s manual of your audio appliances
on which connections are possible.
Tape deck
CD player

Analogue connections

1
Connect the left and right analogue output sockets of
your tape deck, CD player or similar to LINE IN 1 L/R or
~
LINE IN 2 L/R on the DVD recorder system with an
audio cinch cable.
Note:You cannot connect a turntable to LINE IN 1 or 2.
2
Connect the left and right analogue input sockets of a
tape deck or similar recording appliance to LINE OUT L/R
on the DVD recorder system with an audio cinch cable.

Digital connections

1
Connect either
– the digital coaxial output socket of your CD recorder,
CD player or similar to DIGITAL IN on the DVD
recorder system with a digital cinch cable or
– the digital optical output socket of your CD recorder,
CD player or CD changer to OPTICAL IN on the DVD
recorder system with a digital optical cable.
2
Connect the digital coaxial input socket of your CD recorder
or similar digital recording appliance to DIGITAL OUT on
the DVD recorder system with a digital cinch cable.
Note: DIGITAL OUT provides digital 2-channel stereo sound.
The DVD recorder system converts digital multichannel sound
into 2-channel stereo sound without loss of relevant sound
information.
RADIO
MW FM
TV ANTENNA EXT 2
LINE IN 1 LINE IN 2 LINE OUT DIGITAL OUT
IN
AUX I/0
L L
EXT 1 R R
TV OUT
TO TV I/0
DIGITAL IN
OPTICAL IN
OUT IN
L L
R R
DIGITAL OUT
~
MAINS