Placing Tool In Service; Specifications - Ingersoll-Rand 7802 Instructions Manual

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
WARNING
Always wear eye protection
when operating or perform-
ing maintenance on this
tool.
WARNING
Air powered tools can vibrate
in use. Vibration, repetitive
motions or uncomfortable
positions may be harmful to
your hands and arms. Stop
using any tool if discomfort,
tingling feeling or pain occurs.
Seek medical advice before re-
suming use.
WARNING
Keep body stance balanced
and firm. Do not overreach
when operating this tool.
LUBRICATION
Ingersoll- -Rand No. 50
Always use of an air line lubricator with these tools.
We recommend the following Filter- -Lubricator- -Regulator
Unit:
For International- - No. C28- -C4- -FKG0
For USA- - No. C28- -04- -FKG0- -28
Before starting the tool and after each eight hours of
operation, unless the air line lubricator is used, pour
approximately 1.5 cc of Ingersoll- -Rand No. 50 Oil into the
air inlet.
Model Type of Handle
7802, 7802- -EU
Tested in accordance with PNEUROP PN8NTC1.2 at free speed
H
Tested in accordance to ISO8662- -6 at 80% rated free speed
♦
WARNING SYMBOL IDENTIFICATION
90 psig
(6.2bar/620kPa)

PLACING TOOL IN SERVICE

Ingersoll- -Rand No. 28

SPECIFICATIONS

Free Speed
rpm
pistol 2,500
WARNING
Always wear hearing
protection when operating
this tool.
WARNING
Do not carry the tool by
the hose.
WARNING
Operate at 90 psig (6.2 bar/
620 kPa) Maximum air pressure.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Chuck Capacity
in (mm) pressure
3/8 (10) 84.0
2
WARNING
Always turn off the air sup-
ply and disconnect the air
supply hose before instal-
ling, removing or adjusting
any accessory on this tool,
or before performing any
maintenance on this tool.
WARNING
Do not use damaged, frayed
or deteriorated air hoses
and fittings.
International Warning Label:
Order Part No. ___________
FILTER
COMPRESSOR
(Dwg. TPD905- -1)
Sound Level
♦Vibrations
H
dB (A)
power
97.0
Level
2
m/s
0.6