Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Pro's Kit MT-1509
Summary of Contents for Pro's Kit MT-1509
- Page 1 MT-1509 3-1/2 Auto Range Multimeter...
- Page 2 User’s Manual 1 Edition, 2016 ©2016 Copyright by Prokit’s Industries Co., Ltd. The Statement In accordance with the international copyright law, without permission and written consent, one shall not copy the contents of this manual in any form (including storage and retrieval or translation into languages of other countries or regions).
- Page 3 The instrument can measure DC voltage, AC voltage, resistance and connectivity; with non-contact voltage detection function, timely remind the user to pay attention to operation safety, so it’s more safe for the user to use. This manual includes the relevant safety information, warning notices and so on, please read the related contents carefully before using the instrument, and strictly follow all warnings and precautions.
- Page 4 flame retardant clothes, etc.) to prevent being damaged by electric shock and electric arc due to exposed hazardous live conductor. ⚫ The voltage applied between input terminals or between each terminal and earth point cannot exceed the specified ratings of the instrument.
- Page 5 Ground Equipment with double insulation or reinforced insulation protection Low battery Conforms with European Union standard It shows - do not discard this electrical/electronic product into household garbage. CAT II measurement is applicable for testing and CAT II measuring circuits connected to the supply point (socket and similarities ) of a low voltage power supply.
- Page 6 Instrument Familiarization ①. Flash light ②. Non-contact voltage detector ③. Non-contact voltage level indicator ④. LCD Display Hold/Light/NCV keys： Turn on/off backlight, flash light and data hold Press down data hold, and then press again to cancel data hold, press and hold more than 2 seconds, open the backlight and lighting, after about 15 seconds automatically shut down or repress and hold more than 2 seconds to manually turn off...
- Page 7 ⑤. Power on/off button and measurement key：press for power and long press more than 2 seconds for power off, while power on, press this button for measurement. ⑥. Red test lead ⑦. Black test lead Method of Measurement AC /DC Voltage and Resistance Measurement 1.
- Page 8 1. Turn on power 2. Press and hold the "NCV" button, and then place the item under test near the instrument non-contact voltage sensing area (less than 5mm) to sense AC voltage. 3. Non-contact voltage indicator light will light up, saying there is AC voltage present.
- Page 9 0.01V ± (0.5% readings+3） 200V 0.1V 600V ± (0.8% readings+5） Sensitivity：The minimum DC voltage of 0.5V Input impedance: 10MΩ Maximum input voltage: 600V DC or AC RMS AC Voltage Range Resolution Accuracy 0.001V 0.01V ±（0.8 readings +3） 200V 0.1V 600V ±（1.0% readings +5）...
- Page 10 Connectivity Functio Description Testing environment When the buzzer Test current: 100 A; open sounds, the measured circuit voltage: about -1.8V. resistance is less than 50 . Input protection: Maximum 600V DC or AC RMS. Instrument Maintenance This section provides the basic maintenance information, including description of replacing fuse and batteries.
- Page 11 ⚫ To ensure safety operation and product maintenance, when the instrument will not be used for an extended period of time, please remove the batteries to avoid any product damage caused by battery leakage. ⚫ To avoid electric shock or personal injury, before opening the back cover to replace batteries, the instrument should be shut down and checked to ensure that the probe has already been disconnected from the measuring circuit.
Need help?
Do you have a question about the MT-1509 and is the answer not in the manual?
Questions and answers