Download Print this page

FeiYu Tech FY-G3 Ultra 3-Axis Quick Start Manual

Handheld steady gimbal

Advertisement

Quick Links

G3Ultra 三轴手持稳定云台(适用于Gopro3和Gopro3+)
Attention!
Please install the Gopro3 camera
firstly ,then supply power.
请先安装好Gopro3相机后,再通电。
1
Gopro3 Installation Diagram
Gopro3安装图
M2×22滚花手拧螺钉
M2×22 Knurled Thumb
Screw
4
Function Instruction
功能介绍
1. Heading Following Mode:Pitch and roll locking, heading
smooth rotation follow the direction of the handheld.
2. Heading And Pitch Following Mode:Roll locking ,
heading and pitch smooth rotation follow the direction
of the handheld.
3. Locking Mode:Heading ,pitch and roll locking.
1. 航向跟随模式:俯仰和横滚锁定,航向随着手持的方向平滑的
转动。
2. 航向和俯仰跟随模式:横滚锁定,航向和俯仰的方向随着手持
的方向平滑的转动。
3. 锁定模式:航向、俯仰和横滚都锁定。
5
Operation Skill
操作技巧
The Skills Of Adjusting Pitch : Double click the button first to be in heading and pitch following mode. Adjust the attitude to move the pitch to the angle you want ,
then press the button once to lock the angle of pitch being in the heading following mode .
Autodyne Mode: Trun 180 degree of the gimbal(the USB port facing you). Adjust the angle of pitching through the method above, then you can autodyne easily.
调整俯仰角拍摄的技巧:先双按功能健,进入航向和俯仰跟随模式,调整姿态让俯仰轴随动到想要的角度上,然后单按功能健,就可以锁定俯仰角度,进入航向跟随模式。
自拍模式:手握的时候,把手柄调转180度(USB口正对自己),根据手持的高度,通过上面的方法调整俯仰角度,然后就可以方便的自拍了。
6
Indicator Explanation
状态指示灯说明
Indicator
指示灯
3 Axis
2
Open power switch cap, place the batteries in the handheld, press the power
switch after fit on the power switch cap, the 3 axis Gimbal can be activate.
扭开电源盖,把电池放入电池仓后,按下电源开关,即可启动3轴云台。
电源开关
Power Switch
3
Interface And Button
接口和按键
Button
(Identify the operation mode via switch
to different status of the indicator light)
Use to switch operation mode of the
Gimbal, specific method please refer
to: Button with indicator light function
功能健
(通过改变指示灯闪烁来识别云台操
作模式)
用于切换云台操作模式,具体方法参
见:带指示灯的按钮功能健。
Button
功能键
Button With Indicator Light Function :
Item
Single Press
Double Press
Long Press For 1 Second
带指示灯的按钮功能健:
动作方式
单次按下
连续两次按下
长按1秒
Indicator Explanation:
Indicator
指示灯
LED Status
Blue light flashes three times
Blue light flashes twice
Blue light flashes once
Blue light keeps flashing
Indicator
指示灯
电池×3
Battery×3
P C
LED Status
Single Flashes
Double Flashes
Stay On Constantly
指示灯状态
单次闪烁
双次闪烁
常亮
Explain
Full power
Enough power
Low power
No power
USB Interface
Use to connect the computer to
upgrade the latest firmware.
USB接口
用于连接电脑升级最新的三轴手持
稳定云台固件。
USB Interface
USB接口
Function Explanation
Heading following mode
Heading and pitch following mode
Heading,pitch and roll are all locked
功能说明
航向跟随模式
航向和俯仰跟随模式
锁定模式(航向、俯仰和横滚都锁定)
状态指示灯说明
指示灯状态
说明
蓝色3次闪烁
电池电量充足
蓝色2次闪烁
电池电量尚可
蓝色1次闪烁
电池电量低
蓝色快速闪烁
电池没电,需要充电

Advertisement

loading

Summary of Contents for FeiYu Tech FY-G3 Ultra 3-Axis

  • Page 1 3 Axis G3Ultra 三轴手持稳定云台(适用于Gopro3和Gopro3+) Open power switch cap, place the batteries in the handheld, press the power Attention! switch after fit on the power switch cap, the 3 axis Gimbal can be activate. Please install the Gopro3 camera 扭开电源盖,把电池放入电池仓后,按下电源开关,即可启动3轴云台。 firstly ,then supply power. 请先安装好Gopro3相机后,再通电。...
  • Page 2 Do not remove cover (or back plate). 如有零部件需维修, 请咨询授权 If any parts need repair, consult an 服务代理商。 authorized service dealer. Rechargeable Battery USB Cable Type: 16340 USB数据线 可充电电池 型号: 16340 Please visit the official website of Feiyu Tech to get related information : www.feiyu-tech.com 更多相关信息可访问飞宇科技官方网站: www.feiyu-tech.com...