Chapter 2 Getting Started; Connecting The Ac Power Cable - Yamaha Disklavier ENSPIRE DKC-900 Owner's Manual

Chapter
2
Getting Started

Connecting the AC Power Cable

1
Connect the AC power cable extending from the piano to the
AC wall outlet. This connection provides power to the
autoplay piano.
Grand piano
2
Connect the power cord connected to the DKC-900's power
adaptor. This connection supplies power to the control
center unit and the switch box.
Connect the plugs of the AC adaptor in the order shown in the
illustration.
In the upright piano,
the DC plug of the
power adaptor is
connected to the DC
IN terminal
beforehand.
Upright piano
DC IN jack
2 DC plug
1
Power cord
AC adaptor
Warning:
Use the AC power cable attached to
the piano. Use of other AC power
cables may result in damage,
overheating, or fire.
Caution:
• Do not stretch the cable or bend its
ends.
• Do not attempt to use the cable if it
is stretched or if the ends of the
cable have been bent. Attempting
to do so may cause interruptions to
the power supply.
• Always turn off the main unit
power before disconnecting the
AC power cable.
AC outlet
• When you wish to move the piano,
unplug the AC power cable from
3
the AC outlet before proceeding.
• Unplug the AC power cable from
the AC outlet if you do not intend
AC plug
to use the instrument for an
extended period of time.
13