Advertisement
Unpack and inspect the WellTell-X and WellTell-IS and any other
optional equipment. Inspect all parts for damage, missing or incorrect
components.
Before Beginning
The WellTell-IS system is comprised of two parts: the host (WellTell-X)
and the intrinsically safe (IS) barrier client (WellTell-IS). The host,
WellTell-X, is generally installed in the site controller (XFC or XRC). The
IS barrier client, WellTell-IS, is installed near the LevelMaster application.
Hosting Device
Com2 to Host Radio
2100759-004
Remote Wireless Barrier Client
NOTE: See larger detailed figures
Barrier supporting two Level Master sticks
Intrinsically Safe
Barrier Outputs
Figure 1 – Basic Setup
Basic Installation
The following information covers the initial installation of the WellTell-X
host at the site controller (XFC/XRC), the installation of the WellTell-IS
client near the LevelMaster application and the final application
configuration and test at the site controller.
The instructions are broken down into segments that cover the
mechanical and electrical installation along with the configuration of the
system. It is assumed that this installation is taking place within either a
6400 or 6700 enclosure
Step 1
WellTell-IS Mechanical Installation
The mechanical installation for both the WellTell-IS client and WellTell-X
host is the same. Use the following instructions to accomplish the task.
1
Advertisement
