Advertisement
Figure 3 – Pipe Mounted 6400/6700 Enclosure
Step 2
WellTell-X Installation
The WellTell-X host unit is mounted in a communication tray (generally
at the factory) and is designed to be installed in a Totalflow 6400 or 6700
enclosure (see Figure 4).
At the top of the enclosure is the area where communication devices are
installed. This area is referred to as the communication compartment
(see Figure 5). All communication equipment is secured to the
communication tray and slid into this compartment. The WellTell-X is
mounted to standoffs on the communication tray and then slid into the
communication compartment.
3
Advertisement
