Advertisement
1A
Position the pipe saddle on the meter run. Select a location
that allows easy user access and is close to the equipment.
Temporarily attach the saddle on the meter run pipe using U-
bolts and associated hardware.
1B
Screw the 2" by 40" mounting pipe into the saddle (see Figure
2). Place the level against the pipe and vertically align. Adjust
the pipe, mounted in the saddle, until vertical alignment is
achieved. After vertical alignment, securely tighten the 2" by
40" pipe in the saddle. Tighten the saddle mounting bolts.
Ascertain that the pipe is securely installed in the saddle.
1C
Position the enclosure on the 2" mounting pipe, and secure in
place with two U-bolts, flat washers, lock washers and two
9/16" bolts (see Figure 3).
2
Figure 2 – Pipe and Saddle Mount
Advertisement
