Table of Contents
Advertisement
4.5.2 Operation mode
The industrial serial server makes connected Serial equipment become IP-based. That also makes them able to connect to a
TCP/IP networking immediately. The industrial serial server allows traditional Computer/Client COM ports access to a serial
equipment anywhere on the Ethernet LAN network.
This operation mode can be set up as Disable, Remote Pair Master/Slave, RF2217, Serial Telnet, TCP Server, TCP Client,
UDP, and Virtual COM. The operation mode screen in
4.5.2.1 Disable mode
When selecting disabled operation mode, the device port can be disabled. The disable mode screen in
Object
• Apply to all serial
ports
Buttons
: Click to apply port config changes.
When applying any configuration changes of industrial serial server, it's required to
configuration and reboot
User's Manual of IGS-2x00T Serial Device Server Series
Figure 4-5-3
Figure 4-5-3: Operation Mode Screenshot
Figure 4-5-4: Disable Mode Screenshot
Description
To apply this configuration to all serial ports.
system. Therefore the new configuration will be applied after rebooting.
43
appears.
Figure 4-5-4
appears.
save changed
Advertisement
Table of Contents
