4.7.3 Firmware Update
This page facilitates an update of the firmware controlling the switch. The Firmware Update screen in
To open Firmware Update screen, perform the following:
Click Maintence -> Firmware Update.
1.
2.
The Firmware Update screen is displayed as in
3.
Click the "
4.
Select on the firmware, then click "
5.
Once the software is loaded to the system successfully, the following screen
new software after rebooting.
User's Manual of IGS-2x00T Serial Device Server Series
Figure 4-7-3: Firmware Update Page Screenshot
Figure
"button of the Main page; the file selection menu pops up for you to choose firmware.
"; the Software Upload Progress would show the file with upload status.
Figure 4-7-4: Rebooting Screenshot
4-7-3.
Figure 4-7-4
61
Figure 4-7-3
appears.
appears. The system will load the