Table of Contents
Advertisement
4.5.2 Operation mode
The industrial serial server makes connected Serial equipment become IP-based. That also makes them able to connect to a
TCP/IP networking immediately. The industrial serial server allows traditional Computer/Client COM ports access to a serial
equipment anywhere on the Ethernet LAN network.
This operation mode can be set up as Disable, Remote Pair Master/Slave, RF2217, Serial Telnet, TCP Server, TCP Client,
UDP, Virtual COM and Modbus Converter Server/Client. The operation mode screen in
4.5.2.1 Disable mode
When selecting disabled operation mode, the device port can be disabled. The disable mode screen in
Object
• Apply to all serial
ports
Buttons
: Click to apply port config changes.
When applying any configuration changes of industrial serial server, it's required to
configuration and reboot
User's Manual of ICS-2x00T Serial Device Server Series
Figure 4-5-3: Operation Mode Screenshot
Figure 4-5-4: Disable Mode Screenshot
Description
To apply this configuration to all serial ports.
system. Therefore the new configuration will be applied after rebooting.
47
Figure 4-5-3
appears.
Figure 4-5-4
appears.
save changed
Advertisement
Table of Contents
