■ Fast TP interface
10/100BASE-TX copper, RJ45 twisted-pair: Up to 100 meters.
■ Serial Interface
Supports RS-232, RS-422, RS-485 2-wire and RS485 4-wire.
2.1.2 Front Panel
The bottom panels of the Industrial Serial Servers are shown in Figure 2-1-2.
Bottom Panel
■ Reset button
On the bottom panel, the reset button is designed for rebooting the system and stopping the buzzer. The following is the
summary table of the reset button
Reset Button
System Reset
Buzzer Reset
User's Manual of IGS-2x00T Serial Device Server Series
ICS-2200T
Figure 2-1-2: Bottom Panels of Industrial Serial Servers
functions:
Reset Button Pressed and
Released
< 5 sec: System reboot
> 5 sec: Factory default
>1 sec
ICS-2400T
Function
Reboot the Industrial Serial Server
Reset the Industrial Serial Server to Factory
Default configuration. The Industrial Serial
Server will then reboot and load the default
settings as shown below:
Default Username: admin
。
Default Password: admin
。
Default IP address: 192.168.0.100
。
Subnet mask: 255.255.255.0
。
Default Gateway: 192.168.0.254
。
Stop the buzzer
16