Line Filter Nfd/ Nfe; Selection; Technical Data For Line Filters; Ambient Conditions For Line Filters - Bosch Rexroth Indramat ECODRIVE DKC02.1 Series Project Planning Manual

ECODRIVE DKC02.1 Drive Controller
8

Line filter NFD/ NFE

8.1

Selection

Technical data for line filters

Max. connection Rated line
voltage current
1)
I
NETZ
in V in A
AC 480 V +10% 7.5
AC 480 V +10% 16
AC 480 V +10% 30
AC 480 V +10% 55
AC 230 V +10% 4.7
1) Line frequency (50-60 Hz)
2) max. continuous powers at the power connection at an ambient temperature of 45°C
3) Degree of protection IP10

Ambient conditions for line filters

DOK-ECODRV-DKC02.1****-PRJ2-EN-P
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
The filters listed here are designed for the DKC drive controller power
connection.
Please see Chap. 8.4, for information on the line filter for interference
suppression on the DC24V NTM power supply.
Phase Line filter type
number description
3)
2)
3 NFD02.1-480-008
3 NFD02.1-480-016
3 NFD02.1-480-030
3 NFD02.1-480-055
1 NFE01.1-250-006
Fig. 8-1: Technical data for line filters
Operating frequency
Power dissipation
Temperature range
Overload
Saturation reaction
Test voltage
Reduction in current at
an excess temperature
Degree of protection
Fig. 8-2: Ambient conditions for line filter NFD and NFE (horizontal construc-
tion)
Supply terminals Brush shunt
mm² AWG mm²
6 10 --
6 10 1,34
10 6 5,37
10 6 6
Soldering/ --
FASTON tab
6.3x0.8
from DC to 60 Hz at 40 °C
measured 2 or 3 x R I
-25...+85°C
1,5 I 1 min per hour
Nenn
Reduction of the filter attenuation by 6 dB at 2.5
to 3 times the rated current.
L/N -> PE or L -> PE: 2800 VDC 2s at 25°C
L -> PE or 2125 VDC 2s at 25°C
= − Θ
I I 2 85
* ( ) /
N
ture in °C ; I in reference to 45°C
N
IP 10
8-1
Line filter NFD/ NFE
Power Weight
dissipa-
tion
AWG in W n kg
-- 8,7 1,5
16 9 1,7
10 14 1,8
13,5 20 3,1
-- 1 0,245
2
Nenn DC
; Θ Ambient tempera-
40