Display; Ventilation; Starting-Up And Appliance Management; Before The First Use - Foster 7322240 User Manual

Display

Display
0
1...9
U
E
H
P

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation starts his high speed
when the hob is intensively used. The cooling fan reduces his speed and stops automatically
when the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:
• All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast
iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms...
• Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic,
stoneware...
The induction heating zone adapts automatically the size of the pan. With a too small diameter
the pan doesn't work. This diameter is varying in function of the heating zone diameter.
If the pan is not adapted to the induction hob the display will show [ U ].

Starting-up

You must first start-up the hob, then the heating zone:
•
Start-up/ switch off the hob:
Action
To start
To stop
•
Start-up/ switch off the heating zone:
Action
Increase power
Decrease power
Stop
If no setting are made in 20 seconds the hob return in waiting position.
Designation
Zero
Power level
Pan Detection
Error message
Residual heat
Booster
Control panel
Press key [ 0/I ]
Press key [ 0/I ]
Control panel
Press key [ + ]
Press key [ - ]
Press simultaneous[ + ] and [ - ] [ 0 ] or [ H ]
or press [ - ]
Function
The heating zone is activated
Selection of the cooking level
No pan or inadequate pan
Electronic failure
The heating zone is hot
The boosted power is activated
23
Display
2 x [ 0 ]
nothing or [ H ]
Display
[ 4 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]