Advertisement
Table of Contents
- 1 Fuel
- 2 Actions to be Taken Upon Installation
- 3 Insulation and Finishing
- 4 I Nstallation of Fireplace in the Place of Use
- 5 Convection Current
- 6 C Himney
- 7 General Recommendations
- 8 Maintenance
- 9 Cleaning the Window
- 10 S Pecifications and Identification Boards
- 11 Technical Drawing
- 12 Spare Parts
- 13 Guarantee
- Download this manual
Advertisement
Table of Contents
Related Manuals for M Design ARGENTO H Series
Summary of Contents for M Design ARGENTO H Series
- Page 1 ARGENTO H / V Instructions for installation and use Instructions for installation and use of ARGENTO - 1 -...
- Page 2 CAUTION: THE SUPPLIER TAKES NO RESPONSIBILITY FOR ANY 1. GENERAL POSSIBLE DAMAGE, POOR WORKING APPLIANCES AND ACCIDENT AS A RESULT OF INCORRECT INSTALLATION 1.1. T RANSPORT AND INSTALLATION GENERAL ....................... - 2 - Transport the Argento in an upright position, or in encumbering 1.1.
-
Page 3: Fuel
Optimum fuel efficiency and optimal operation of the heater is achieved Opening the door for cleaning loading of about 3.5 kg wood per hour, horizontally placed on the grate in the middle of the combustion chamber. Chimney draft should be 12 -15 Pa and regulator of air supply at maximum. 2.2. -
Page 4: Actions To Be Taken Upon Installation
3. INSTALLATION Regulating the height of the appliance: This can be made in two ways. 3.1. A CTIONS TO BE TAKEN UPON INSTALLATION A regulation by 5 cm (Pic.6) and a fine regulation by screw (Pic.7 ). Your supplier is the specialist who chooses to represent M-design in your area. For your own safety and satisfaction, we advise you to entrust him with the installation. -
Page 5: Insulation And Finishing
For connecting the air from outside is mounted from the bottom connection 4. INSULATION AND FINISHING pieces (Pic. 9 right). Please, follow this instruction. The appliance can overheat if you do not apply these instructions. Once installation is complete, the appliance can be fitted. Once you have checked everything, you can perform the final insulating and finishing operations. -
Page 6: Convection Current
Place all the fittings that you use at the same lengths and angles if possible, 5. CONVECTION CURRENT otherwise some grids could give off more heat than others and, seeing that a hot air pipe functions in a manner similar to a chimney, the one that is hot first has the most draught and therefore becomes hot even more quickly. - Page 7 EACH APPERTURE YOU MAKE, MUST BE CONNECTED WITH FLEXIBLE Instructions for installation and use of ARGENTO - 7 -...
-
Page 8: C Himney
5.4. A IR SUPPLY REGULATION 5.3. C HIMNEY The air supply to the Argento can be regulated manually. Use the key (Pic.15) The construction of chimney must comply with strict conditions: to slide the regulator to the left to close primary and secondary air and on ... -
Page 9: General Recommendations
6. GENERAL RECOMMENDATIONS After 11/2015: self-cleaning of labyrinth deflector by door opening. The appliance must be connected to the chimney and tested before the material is cemented in. In order to ensure that the appliance functions optimally do not put any inflammable materials in the immediate vicinity of the stove. -
Page 10: S Pecifications And Identification Boards
6.4. S PECIFICATIONS AND IDENTIFICATION BOARDS TYP- ARGENTO 750 H 900 H,V 1150 H,V 1200H 1350H Nominal heat output (kW) The average efficiency (%) Heat flow to the space (kW) Output range (kW) 3 - 11 3,5 - 12 4 - 13 5-13 6-14 Flue gas temperature by... -
Page 11: Technical Drawing
7. T ECHNICAL DRAWING With convection chamber Without convection chamber ARGENTO 750 H PREMIUM 225 kg ARGENTO 750 H BASIC 210 kg Instructions for installation and use of ARGENTO - 11 -... - Page 12 Without convection chamber With convection chamber ARGENTO 900 H BASIC 230 kg ARGENTO 900 H PREMIUM 260 kg Instructions for installation and use of ARGENTO - 12 -...
- Page 13 Without convection chamber With convection chamber ARGENTO 900 V BASIC 260 kg ARGENTO 900 V PREMIUM 290 kg Instructions for installation and use of ARGENTO - 13 -...
- Page 14 Without convection chamber With convection chamber ARGENTO 1050 H BASIC 260 kg ARGENTO 1050 H PREMIUM 290 kg Instructions for installation and use of ARGENTO - 14 -...
- Page 15 Without convection chamber With convection chamber ARGENTO 1050 V BASIC 310 kg ARGENTO 1050 V PREMIUM 340 kg Instructions for installation and use of ARGENTO - 15 -...
- Page 16 Without convection chamber With convection chamber ARGENTO 1200 H BASIC 290 kg ARGENTO 1200 H PREMIUM 320 kg Instructions for installation and use of ARGENTO - 16 -...
-
Page 17: Spare Parts
8. S PARE PARTS Instructions for installation and use of ARGENTO - 17 -... -
Page 18: Guarantee
9. GUARANTEE This page is your warranty card. 11. Costs linked to the misuse and/or abuse of the appliance The guarantee is only valid for faults caused by construction defects or 12. In cases where the buyer cannot show his/her warranty card with defects in the parts used to build the appliance.