Advertisement
Safety
This equipment is designed with the utmost care for the safety of those who install
and use it. However, special attention must be paid to the dangers of electric
shock and static electricity when working with electrical equipment. all guidelines
of the FCC and of the computer manufacturer must therefore be followed at all
times to ensure the safe use of the equipment.
EU Countries Intended for Use
The eTsI version of this device is intended for home and office use in austria,
belgium, denmark, Finland, France, Germany, Greece, Ireland, Italy, luxembourg,
the netherlands, Portugal, spain, sweden and the United Kingdom.
The eTsI version of this device is also authorized for use in eFTa member states
Iceland, liechtenstein, norway and switzerland.
EU Countries Not Intended for Use
none.
pAckAge coNteNts
• Wireless N ADSL2+ 4-Port Modem Router, Model 524360 (Annex A) or
Model 524377 (annex b)
• Power adapter
• Ethernet Cat5 RJ-45 cable, 1.0 m (3 ft.)
• RJ- 1 1 telephone cable, 1.8 m (6 ft.)
• Quick install guide
• Setup CD with user manual and setup wizard
hArDwAre
Front Panel
as listed below, the led s indicate the current status of the router.
LED
PWR (green)
Wlan (yellow)
WPs (Yellow)
adsl (green)
lan (lnK/aCT)
Ports 1-4 (green)
4
Mode
Status
on
Ready for operation.
off
The wireless lan is disabled.
blinking
Wireless traffic is being transmitted/received.
off
WPs function is disabled.
blinking
WPs function is enabled.
on
successful connection to an adsl dslan.
blinking
no connection.
on
The lan cable is connected to the router.
off
no network connection.
blinking
network traffic is being transmitted/received.
Advertisement
