Advertisement
coNfigurAtioN
ISP
This router provides a setup wizard used to configure the adsl settings. This
wizard collects and enters adsl settings from some Internet service providers
(IsPs) simply by selecting the IsP when prompted. If you cannot find your
particular IsP listed in the wizard, refer to the Quick start instructions in the Web
Management section of the user manual on the enclosed Cd.
before starting:
• Make sure the ADSL cable is connected to the router correctly. When the
adsl cable is working normally, the adsl led will be on.
• Uninstall all dial-up programs previously installed for the USB modem or other
dial-up devices.
• It's recommended that the router first be configured with the Ethernet cable
connected prior to setting the wireless functions.
NOTE: This setup wizard can be run in Windows 2000, xP or Vista, though
the screen images shown may be representative of just one particular platform.
1. Insert the enclosed setup Cd (featuring the setup wizard) into your Cd-RoM
drive. The autorun.exe program should be executed automatically. If not,
run autorun.exe manually from the "autorun" folder on the Cd.
2. Click on "setup Wizard"
when the initial menu
appears on screen. The
wizard will search for
the router. If the router
can't be found, enter the
IP address and password
of the router, then click
"next" to search again.
3. The wizard automatically
selects the country you're
in (by identifying the
language of the computer's
operating system), and
will then display the select
IsP screen. select the IsP.
If it's not listed, click
"other" to re- select the
country, or manually configure the IsP information (see software/setup Wizard /
Manually set IsP in the user manual).
4. If prompted, enter the IsP-provided username and password, then click "next."
6
Advertisement
