Advertisement
Quick Start
The Quick start section is designed to get you using the router as quickly as
possible. before configuring the router, check with your IsP (Internet service
provider) as to what kind of service is provided (examples are shown in the
following table).
PPPoE
PPPoA
RFC1483 Bridged VPI/VCI, VC-based/llC-based multiplexing to use
RFC1483 Routed
1. on the Home Page screen, click "Run Wizard" to start the configuration. on
the subsequent screen, click "next" to continue.
2. set and confirm the new
password; then click "next"
to continue.
3. select the time zone; then
click "next" to continue.
VPI/VCI, VC-based/llC-based multiplexing, Username,
Password (and service name).
VPI/VCI, VC-based/llC-based multiplexing, Username,
Password.
bridged Mode.
VPI/VCI, VC-based/llC-based multiplexing, IP address,
subnet Mask, Gateway address and domain name
system (dns) IP address (a fixed IP address).
9
Advertisement
