Table of Contents
Advertisement
About this task
The 2077-92F, 2077-A9F expansion enclosure supports 92 drives. Figure 38 on page 45 shows an
example of a drive assembly.
Figure 38. Drive assembly
1
Disk drive
2
Online indicator
3
Fault indicator
4
Release latch
5
Drive latch toes
6
Drive carrier
Procedure
1. Read all of the available safety information.
2. Remove the cover, as described in "Removing the top cover: 2077-92F, 2077-A9F " on page 38.
3. Locate the empty drive slot to receive the new drive or that contains the faulty drive that you want to
replace.
Note: When a drive is faulty, the amber fault indicator is lit (
replace a drive unless the drive fault indicator is on or you are instructed to do so by a fix procedure.
A label on the enclosure cover (Figure 39 on page 45) shows the drive locations in the enclosure.
The drive slots are numbered 1-14 from left to right and A-G from the back to the front of the
enclosure.
Figure 39. Drive locations in a 5U expansion enclosure
3
in Figure 38 on page 45). Do not
Chapter 2. Installing the system hardware 45
Hide quick links:
Advertisement
Table of Contents
