Table of Contents
Advertisement
Figure 14. Hole locations in the front of the rack
•
1
Upper rail mounting bracket pin
•
2
Lower rail mounting bracket pin
•
3
Rack mounting screw hole
5. Ensure that the appropriate bracket pins are installed in the front and rear bracket of each rail.
Each rail comes with four medium pins preinstalled (two in the front bracket and two in the rear
bracket). Large and small pins are provided separately. Use the pins that are appropriate for the
mounting holes in your rack. See Table 7 on page 18.
Table 7. Selecting bracket pins for your rack
Mounting holes
Round,
unthreaded
Round, threaded Unscrew the medium pins and replace with the smaller pins that are supplied
Square
6. At each end of the rail, grasp the tab
page 19).
18 Storwize V5100 : Quick Installation Guide for MTM 2078-424, 2078-12F, 2078-24F, 2078-92F, and 2078-
U5B
Bracket pins
Use the preinstalled medium pins.
with the rails.
Unscrew the medium pins and replace with the large pins that are supplied with
the rails.
1
and pull firmly to open the hinge bracket (see Figure 15 on
Hide quick links:
Advertisement
Table of Contents
