Table of Contents
Advertisement
Figure 42. Replace the drive
8. Rotate the handle down to lock the drive assembly into the chassis (
9. Ensure the toe on the bottom of the latch is fully engaged with the partition in the chassis.
10. Ensure that the top toe of the latch is also fully engaged (
11. Repeat steps "4" on page 46 through "10" on page 47 for each drive you are replacing.
3
in Figure 42 on page 47).
4
in Figure 42 on page 47).
Chapter 2. Installing the system hardware 47
Hide quick links:
Advertisement
Table of Contents
