Weight Of Expansion Enclosure Parts - IBM Storwize V5100 MTM 2078-424 Quick Installation Manual

• At least three persons are required to move the enclosure while it is in the rack (if you are moving the
enclosure off the rails). Even after the drives, power supply units, secondary expander modules,
canisters, fans, and top cover are removed, the enclosure weighs approximately 43 kg (95 lbs).
• To maximize rack stability, always install the expansion enclosure in the lowest possible position in the
rack.

Weight of expansion enclosure parts

Table 8 on page 28 summarizes the weight and quantity of the parts (FRUs) that are shipped with the 5U
expansion enclosure.
Table 8. Weight of expansion enclosure parts
FRU FRU part
description number
Enclosure 01LJ607
FRU (replaces
enclosure
FRU P/N
01LJ112)
Rail kit 01LJ114
Front fascia 01LJ116
(4U front
cover)
Display panel 01LJ118
assembly
PSU fascia 01LJ120
(1U cover)
Power supply 01LJ122
unit (PSU)
Secondary 01LJ860 (for
expansion use with
module enclosure
FRU P/N
01LJ607)
01LJ124 (for
use with
enclosure
FRU P/N
01LJ112)
Fan module 01LJ126
Expansion 01LJ128
canister
Cable 01LJ130
management
arm (lower
and upper
arms)
Top cover 01LJ132
28 Storwize V5100 : Quick Installation Guide for MTM 2078-424, 2078-12F, 2078-24F, 2078-92F, and 2078-
U5B
Weight per unit
kg lbs
42.5 93.696
9.231 20.351
0.303 0.668
0.020 0.044
0.010 0.022
3.335 7.352
0.826 1.821
0.890 1.962
1.588 3.501
1.373 3.027
3.720 8.201
Total weight
Quantity
shipped
kg
1 42.500
1 9.231
1 0.303
1 0.020
1 0.010
2 6.670
2 1.652
4 3.560
2 3.176
1 1.373
1 3.720
lb
93.696
20.351
0.668
0.044
0.022
14.705
3.642
7.848
7.002
3.027
8.201