Table 10. Enclosure weight as FRUs are installed (continued)
Enclosure assembly
FRUs installed
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia (1U and 4U)
• PSUs
• Expansion canisters
• Fan modules
• Fan interface boards
• 92 2.5-inch tier 1 flash
drives
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• 92 2.5-inch hard disk
drives
• Enclosure (01LJ607 or
01LJ112)
• Secondary expansion
modules
• Fascia
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• 92 3.5-inch Near-Line
SAS hard disk drives
Conversely, the overall weight of the expansion enclosure is reduced as you remove parts. However, even
with parts removed, the 5U expansion enclosure is heavy. Depending on the number of parts that remain,
you might need four persons or a mechanical lift to support the weight of the expansion enclosure.
FRUs not installed
• Cover
• Cover
• Cover
Approximate weight
kg
78.6
86
138.6
Chapter 2. Installing the system hardware 31
lb
173.3
189.6
305.6