White Led Light Under The Edge Of The Tub (Optional); Sound (Optional); Basic Operation Of The Bath - DURAVIT Combi-System L Operating Instructions Manual

Hide thumbs Also See for Combi-System L:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22
Green

4.8 White LED light under the edge of the tub (optional)

An LED strip is optionally available under the wide edge of the Darling New tubs. This
enhances the bathing atmosphere with soft, white ambient light.

4.9 Sound (optional)

Structure-borne sound converters ensure optimal fidelity and enjoyment above and un-
der water. You can connect an external audio source and listen to your favourite music
via Bluetooth.

5. Basic operation of the bath

Buttons and their functions
All buttons are softly backlit when the display is activated. Activated buttons or ready-
to-use setting buttons light up or flash in full brightness.
If activated, the buttons respond with a slight vibration. If the upper or lower limits are
reached, the "+" or "-" buttons will vibrate for a longer period. The buttons also vibrate
for a long period if the selected function is not possible.
Activate the display by holding down the "On/Off" button.
All functions can be deactivated at any time by pressing the "On/Off" button.
Start or end the individual functions by pressing function buttons labelled "Foot
jets", "Side jets", "Durapearl", "Swivel jets" and "Light".
Select these by holding down the function buttons in the setting menu. Change
the intensity, massage type, etc. with the setting buttons , + and -. You can leave
the setting menu again by pressing the function button or automatically after a few
seconds.
relieving, calming, stabilising
29

Advertisement

Table of Contents
loading

Table of Contents