Controls; Drain And Overflow Fittings; Maintenance - DURAVIT Combi-System L Operating Instructions Manual

> Avoid contact with nail polishes, lipsticks and all hair dyes. Stains of this type can
only be removed by sanding.
> Do not use abrasive or hard sponges.
Failure to observe these instructions may damage the surface. Complaints due to im-
proper cleaning and care will not be covered by the warranty.
Cleaning the tub
> Clean the surface with a soft damp cloth.
> Remove light soiling with warm water and some standard detergent or vinegar-/
lemon-based cleaning agent.
> Remove heavy soiling with a magic cleaning eraser, warm water and some standard
detergent or vinegar-/lemon-based cleaning agent.
? Soiling is still visible after cleaning?
> Remove the soiling with a soft cloth and some scouring agent.
? A silky gloss effect has emerged on the surface?
> Rub the treated area with a Scotch Brite sponge or 1000 grade super fine sandpa-
per to restore the matt appearance of the surface.
Rinsing and drying the tub
> Rinse the tub well with clean water after the treatment.
> Dry the tub with a soft cloth.
7.4

Controls

> Clean the controls with a soft damp cloth.
7.5 Drain and overflow fittings
> Clean the drain and overflow fittings with a soft damp cloth.

8. Maintenance

Residual-current circuit-breaker
Check the residual current circuit breaker (RCD) regularly as described in its operating
instructions.
36