White Led Light Under The Edge Of The Tub (Optional); Sound (Optional); Operation; Switching On The Whirlpool Tub - DURAVIT Air-System Operating Instructions Manual

Hide thumbs Also See for Air-System:
Table of Contents

Advertisement

Available languages

Available languages

4.3 White LED light under the edge of the tub (optional)

An LED strip is optionally available under the wide edge of the Darling New tubs. This
enhances the bathing atmosphere and gives off a friendly, comforting light.

4.4 Sound (optional)

3 structure-borne sound converters ensure optimal fidelity and enjoyment above and
under water. You can connect your music player and listen to your favourite music by
means of Bluetooth.

5. Operation

Note! Disinfect the whirlpool system before using it for the first time, and then after
every tenth bath, but at least one a month and after a long period of no use.
5.1

Switching on the whirlpool tub

Note! Switch off the whirlpool tub when finished.
> Switch on the main switch.

5.2 Switching off the whirlpool tub

Note for 2nd floor! After the water has drained, wait at least 5 min. before switching
off the whirlpool tub, so that the residual water drain lines can open automatically
(sound of motor).
> Wait until the tub has emptied completely.
> Your whirlpool tub comes with a residual water drain feature as standard. In addi-
tion, you can remove any remaining water from the lines to the air nozzles with the
aid of the blower:
Just activate the air nozzles for 2 minutes.
> Switch off the main switch.
18

Advertisement

Table of Contents
loading

Table of Contents