Turning On "Rainbow" Colour Programme; Activating Colours; Changing Brightness; Changing Duration Of Colour Shift - DURAVIT Combi-System L Operating Instructions Manual

Turning on "Rainbow" colour programme

> Press the "Light" button.
The light is switched on/off ("Rainbow" colour programme).

Activating colours

> Press the "Light" button until it flashes.
Setting buttons are activated and illuminated.
> Press the " " button until the desired colour appears (white – red – violet – blue –
turquoise – green – yellow - "Rainbow" colour programme).

Changing brightness

Prerequisite: Colour activated.
> Press the "Light" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the „-" or „+" buttons.
Intensity increases or decreases.

Changing duration of colour shift

Prerequisite: "Rainbow" colour programme activated.
> Press the "Light" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the „-" or „+" buttons.
Colour shift duration decreases or increases.

6.8 Switching on the white LED light under the edge of the tub (optional)

> Touch the Duravit logo on the edge of the tub.

6.9 Switching the sound (optional) on / off

DANGER
Death caused by electric shock.
> Do not take your audio source into the whirltub and observe the appropriate pro-
tected areas for the use of electrical equipment.
Prerequisite: Bluetooth capable audio source with an
> Turn on the display.
The whirltub's Bluetooth mode turns on when the display is activated.
protocol.
A2DP
33