Jcm Tool Suite™ Overview - JCM TBV Series Training

October, 2016
JCM TOOL SUITE
The JCM Tool Suite
ing Operational Modes and User-selectable Functions (accessible by clicking
the
Service Mode
Table 9 JCM Tool Suite Operational Modes and Functions
(All DS1/DS3 DIP Switches OFF)
* In Test Mode, Bezel LED flashes WHITE.
NOTE: All Diagnostic Tests can be performed by specifying various DIP Switch
settings. Refer to Section 6 of the JCM Global
Validator Operation and Maintenance Manual (P/N 960-100926R) for information
on setting DIP Switches for testing purposes.
To use the JCM Tool Suite Software Application:
1. Connect a standard USB Type A-to-Mini B cable from the PC's USB Port to the
TBV Unit.
2. Apply electrical power to the TBV Unit.
3. Launch the JCM Tool Suite Software Application.
The Main Screen will be displayed (Figure 4).
Part No. 960-100941R_Rev. A
JCM® Training Overview
™
OVERVIEW
™
Standard Edition Software Program supports the follow-
drop-down menu as shown in Figure 4):
Service Mode
Normal (Operational) Mode
Test Mode*
(DS1/DS3 DIP Switch 8 ON)
Figure 4 JCM Tool Suite Main Screen
TBV Transaction Based Validator
Functions
(
Download
Statistics
Event Log View
Download
Statistics
Sensor Adjustment
Performance Test
Event Log View
® ®
TBV Series Transaction Based
1 0
© 2016 JCM American Corporation