Table of Contents
Advertisement
5 Installation
Fig.39
Installation of the connection plate
Fig.40
Fitting the indoor module
Fig.41
3
(1)
36
5.5.5
Before installing the indoor module, position the connection plate supplied
separately. Follow the instructions supplied with the plate.
MW-1001529-1
Fitting of the indoor module is facilitated by 2 castor wheels attached to
the lower section.
MW-3000675-1
5.5.6
Level the indoor module using the four adjustable feet.
(1) Adjustable feet with minimum required space of 10 mm
1. Open the hook on the expansion vessel to access the feet at the rear
of the appliance.
2. Remove the expansion vessel.
3. Unscrew the feet using an Allen key.
4. Use a spirit level to check that the appliance is completely level.
5. Refit the expansion vessel in its housing and close the hook to
1
immobilise the vessel.
2
5.5.7
To prevent the indoor module from tipping over, we recommend attaching
it to the wall using the attachment provided on the top of the appliance.
Positioning the indoor module
Levelling the indoor module
(adjustment range: 0 to 20 mm)
Attaching the indoor module to the wall
7654506 - v06 - 19112019
Advertisement
Table of Contents
