Operating & Maintenance Tips - General VOC08 Hardware Manual

Data logging voc meter
Hide thumbs Also See for VOC08:
Table of Contents

Advertisement

Wet Bulb Measurement Range: 12.2° to 118.8°F
(-11° to 48.2°C)
Data Logging Capacity: 32,000 points
Display Type / Size: Dual readout LCD / 2 in. (51mm) diagonal
Auto Power Off Trigger: 15 minutes of front-panel inactivity
(can be disabled)
Operating Temperature: 32° to 122°F (0° to 50°C)
@ 0 to 95%RH, non-condensing
Dimensions: 8.3 x 2.4 x 1.0 in. (210 x 60 x 25mm)
Weight: 7.2 oz. (204g), including batteries
Power Source: (6) "AAA" batteries (not included) or included
110VAC adaptor
OPERATING & MAINTENANCE TIPS
When the low battery indicator appears in the upper left
corner of the LCD, install fresh batteries immediately,
following the instructions on pages 6 and 7 of this manual.
The metal-oxide semiconductor VOC sensor is as power-
hungry as it is sensitive. General recommends using the
included AC adaptor if you expect to routinely conduct
measurement sessions lasting more than 15 minutes.
Remove the batteries if you don't expect to use the VOC08 for
an extended period of time (months or years).
Abrupt temperature changes will cause condensation and
possible vapor penetration. Clean the LCD after the vapor
evaporates. Blow off loose particles with compressed air.
Gently brush remaining debris away with a lens hair brush.
Never use a solvent or an abrasive cleaner on the VOC08.
To clean the housing, use a soft, damp cloth.
12

Advertisement

Table of Contents
loading

Table of Contents