Table of Contents
Advertisement
displayed unit °C or °F to %. Then repeat Step 4. Each
press of the HOLD or BKLT button increases or decreases
the amount of RH offset by 0.1%.
6) When you are satisfied with the offset value(s) you have
entered, press and hold the SET button to save the
settings. After the bottom line of the LCD shows SAVE for
two seconds, press and hold the PWR button to power off
the meter with the offsets in place.
NOTE: To apply the maximum amount of temperature offset
(+9.9° or -9.9°) or RH offset (+9.9% or -9.9%), press and
hold the HOLD and/or BKLT buttons to quickly increase or
decrease the values.
WARRANTY INFORMATION
This product from General Tools & Instruments (General) is
warranted to the original purchaser to be free from defects in
material and workmanship for a period of two years. Subject
to certain restrictions, General will repair or replace this
instrument if, after examination, the company determines it
to be defective in material or workmanship.
This warranty does not apply to damages that General
determines to be from an attempted repair by non-authorized
personnel or misuse, alterations, normal wear and tear, or
accidental damage. The defective unit must be returned to
General Tools & Instruments or to a General-authorized service
center, freight prepaid and insured.
14
Advertisement
Table of Contents
