Table of Contents
Advertisement
PRODUCT OVERVIEW
Fig. 1 shows all controls, indicators and physical structures of
the VOC08. Fig. 2 shows all possible indications on the LCD.
Familiarize yourself with the locations and functions of the
control buttons and the meanings of the display icons before
moving on to the Setup and Operating Instructions.
1. VOC and temp-RH sensors inside vented ball housing
2. LCD with upper and lower readouts
3. Control buttons
• HOLD. Pressed briefly, freezes both
readouts. Also used to raise VOC high
alarm threshold. Pressed at same time
as PWR button with meter off, disables
15-minute APO function. Pressed and
held, clears stored Min and Max session
values.
• MODE. Pressed briefly, selects
value(s) shown on lower readout:
Ambient temperature alternating with
RH; Dew Point (DP) temperature; or
Wet Bulb (WB) temperature. Also shifts
flashing digit one position to the left in
VOC high alarm threshold setting mode.
• PWR. Pressed briefly with meter off,
powers meter on. Pressed and held
with meter on, powers meter off.
Pressed briefly with meter on, arms/
disarms high VOC concentration alarm.
• MAX/MIN. Pressed briefly, displays
on the upper readout the highest or
lowest concentration detected since the
6
Fig. 1.
The controls,
indicators
and physical
structures
of the VOC08
1
2
3
7
5
5
Advertisement
Table of Contents
