Table of Contents
Advertisement
• Pin Length: 0.2 in. (5mm)
• Low Battery Indication: <6.5VDC
• Operating Temperature: 32° to 122°F (0° to 50°C)
• Calibration Check Point: 15.9% ±3%WME
• Dimensions: 6.6 x 2.7 x 1.25 in. (168 x 69 x 32mm)
• Weight (including battery): 4.6 oz. (130g)
• Power Source: (1) "9V" battery (included)
OPERATING & MAINTENANCE TIPS
When the battery icon (visible on all four display screens as well as the Temperature
Compensation Selection Screen) indicates a charge of 33% or less, it's time to replace the "9V"
battery that powers the MMD8P (although measurements will remain valid for several hours
after the icon first appears). To replace the battery, follow the Setup Instructions on p. 4.
This equipment has been tested and found to comply with the limits for Class B digital devices,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on. The user is encouraged to try to correct the interference by one
or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference, and 2) This device must accept any
interference received, including interference that may cause undesired operation.
WARNING: Any changes of modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Remove the battery when storing the meter for an extended period of time.
Never drop or disassemble the meter or immerse it in water.
WARRANTY INFORMATION
General Tools & Instruments' (General's) MMD8P Precision Multi-Species Wood Moisture Meter is
warranted to the original purchaser to be free from defects in material and workmanship for a
period of one year. Subject to certain restrictions, General will repair or replace this instrument if,
after examination, the company determines it to be defective in material or workmanship. The
warranty period begins on the date of purchase. You are encouraged to register your product
online. General will extend your warranty an additional 60 days if you register at
www.generaltools.com/ProductRegistry.
This warranty does not apply to damages that General determines to be from an attempted repair
by non-authorized personnel or misuse, alterations, normal wear and tear, or accidental damage.
The defective unit must be returned to General Tools & Instruments or to a General-authorized
service center, freight prepaid and insured.
11
Advertisement
Table of Contents
