Operating & Maintenance Tips; Warranty Information - General RHMG650 User Manual

OPERATING & MAINTENANCE TIPS
• When the
battery using the procedure on p.7.
• Do not immerse the RHMG650 in water or get water on it.
• Do not disassemble the unit. Opening the case voids the warranty.
• To avoid fouling the humidity/temperature sensor, do not operate the unit in very dusty
environments. Replace the dust cap protecting the sensor after each measurement session.
• Remove the battery if you do not expect to use the unit for several months or longer. This will
avoid potential leaks of battery acid that might damage or destroy the unit.

WARRANTY INFORMATION

General Tools & Instruments' (General's) RHMG650 9-in-1 Thermo-Hygrometer/Moisture Meter is
warranted to the original purchaser to be free from defects in material and workmanship for a
period of one year. Subject to certain restrictions, General will repair or replace this instrument if,
after examination, the company determines it to be defective in material or workmanship.
This warranty does not apply to damages that General determines to be from an attempted repair
by non-authorized personnel or misuse, alterations, normal wear and tear, or accidental damage.
The defective unit must be returned to General Tools & Instruments or to a General-authorized
service center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described herein is a condition of
the contract for purchase of this product. In no event shall General be liable for any incidental,
special, consequential or punitive damages, or for any cost, attorneys' fees, expenses, or losses
alleged to be a consequence of damage due to failure of, or defect in any product including, but
not limited to, any claims for loss of profits.
14
icon appears on the bottom row of the LCD, it's time to install a fresh "9V"