Setup Instructions; Install Batteries - General VOC08 Hardware Manual

meter was last powered on. Also shifts flashing digit one
position to the right in VOC high alarm threshold setting
mode.
• SET. Pressed and held, enters VOC high alarm threshold
mode; also saves changed VOC alarm threshold settings
and temperature/RH offset values.
• UNIT. Selects °F or °C unit for ambient, DP and WB
temperatures.
• BKLT. Pressed briefly, turns backlight on and off. Also
used to lower VOC high alarm threshold. Pressed and held
in Key Start or Rollover mode (see Software Manual),
starts/stops data logging without a USB connection to a PC.
4. Battery compartment (on back)
5. Threaded tripod mounting screw hole
(on bottom)
6. Jack for AC adaptor (on side)
7. Micro USB jack
Fig. 2. All possible
display indications

SETUP INSTRUCTIONS

INSTALL BATTERIES

The VOC08's battery compartment (Fig. 1, Callout 4) is located
on the lower back of the meter.
Obtain six "AAA" batteries. To install them:
1. Open the battery compartment by using your thumb to
slide its cover down and away from the meter.
6