Polycom QDX 6000 Release Notes page 6

Release Notes
Polycom® QDX 6000™, Version 4.0.1.1
2
3
To stop viewing the streamed conference:
>> Close the web browser.
This stops the stream but does not end the call.
Camera Control for the Second PTZ Camera
QDX 6000 V4.0.1 supports camera control for the second PTZ camera.
To connect a second PTZ camera to the QDX 6000 system:
1
2
3
Notes:
•
In the browser address line, enter http://xxx.xxx.xxx.xxx/m_multicast.htm,
where " xxx.xxx.xxx.xxx" is the QDX 6000 system's IP address.
In the prompted window, enter the user name "meeting" and the meeting
password set on your QDX 6000 system.
The stream starts automatically.
Connect a second camera supporting PTZ, such as Polycom EagleEye View
camera, to DOC camera input and serial control. The Polycom female-male
convert cable (labeled as "2
second camera serial port to the QDX serial control port.
Note: The part number of the serial cable for second PTZ camera control is
2457-32891-001. This cable can be easily recognized by the "2
label on one end of the cable.
Set Doc camera as video source.
Go to System > Admin Settings > General Settings > Serial Ports, and set
RS-232 Mode to Camera PTZ. Then click Detect Camera to detect the
camera manually.
IR signal cannot be received through the second PTZ camera.
CAMERA") MUST be used to connect the
ND
6
CAMERA"
ND