Polycom QDX 6000 Release Notes page 5

Release Notes
Polycom® QDX 6000™, Version 4.0.1.1
3
4
To stream a conference:
1
2
3
•
•
To stop streaming a conference:
1
2
To view a streamed conference:
1
Go to System > Admin Settings > General Settings > Security > Security
Settings > >
Enable Allow Video Display on Web.
Setting
Allow Video Display on Web Specifies whether to allow viewing of the room where the
Go to System > Admin Settings > Network > IP > Multicast, select the
Enable Multicast option.
In the browser address line, enter the system's IP address, for example, http:
// 10.11.12.13, to go to the system's web interface. Go to Admin Settings >
General Settings > Security, set the Remote Access password and the
Meeting password.
Place the video call to other participants.
You can start streaming only when Polycom QDX 6000 is in a call.
Make sure the Allow Video Display on Web option is enabled (System > Admin
Settings > General Settings > Security > Security Settings >
Go to System > Admin Settings > Network > IP > Multicast.
Clear the Enable Multicast selection.
On a computer running Windows XP or Windows Vista operating system,
open an Internet Explorer 6.x, 7.x, or 8.x.
.
Description
system is located, or video of calls in which the system
participates, using the Polycom QDX 6000 web interface.
Note: This feaure activates both near site and far site video
display in Web Director.
5
> ).