Digital Networks DECserver 90M+ Installation Manual page 34

Verifying the Operation of the DECserver 90M+ Ports
Verifying the Operation of the DECserver 90M+ Ports
To verify the operation of each port, perform the following steps:
1) Connect a terminal to the port you want to test.
2) Press the Return key two or three times to set the operating speed (autobaud) of
the port.
3) Type a character on the terminal and observe each Port Activity LED for a
reaction. The Port Activity LED should turn on, indicating that the corresponding
port is in use. Additional characters should then cause the LED to blink.
2-14 Installation