Table of Contents
Advertisement
8) Optionally, attach a device configured with the following settings to the console
port (default is port 1) using a cable terminated with an RJ45compatible plug.
Character size
Flow control
Parity
Stop bits
Input speed
Output speed
A 10 BASE-T Ethernet connection must be configured to successfully
NOTE
complete selftest.
9) Verify that the DECserver 90M+ successfully ran all of the self-tests.
Installing the DECserver 90M+ Hardware
8
XON
NONE
Dynamic
9600 baud
9600 baud
.
Installation 2-3
Advertisement
Table of Contents
Need help?
Do you have a question about the DECserver 90M+ and is the answer not in the manual?
Questions and answers