Table of Contents
Advertisement
Hardware Installation Manual
2
Unpacking the Device
Follow the procedure below for unpacking the device.
To unpack MP-124:
1.
Open the shipping carton and carefully remove the packing materials.
2.
Remove the MP-124 unit from the carton.
3.
Check that there is no equipment damage.
4.
Ensure that in addition to the MP-124 unit, the package contains the following items:
AC-powered model: AC power cord
•
•
DC-powered model: unwired DC terminal block with two crimping screws
Two short equal-length brackets and bracket-to-device screws for 19-inch rack
•
installation
•
Regulatory Information document
5.
Check, retain and process any documents.
6.
Notify AudioCodes or your local supplier of any damage or discrepancies.
MediaPack Analog Gateways
11
2. Unpacking the Device
MP-124
Advertisement
Table of Contents
