Transportation, Storage And Disposal - Husqvarna R 316TX Operator's Manual

Symbol
Note: The look of the display can be different between
different models.
Transportation
• The product is heavy and can cause crush injuries.
Be careful when you load it onto or off a vehicle or
trailer.
• Use an approved trailer for transportation of the
product.
• Make sure that you have knowledge of local road
traffic regulations before transportation of the
product in a trailer or on roads.
106
Name
Rotating blades indi-
cator
Parking brake indica-
tor
Operator presence
control (OPC) indica-
tor
Servicing indicator
Low fuel level indica-
tor
®
Bluetooth indicator
Digital lock

Transportation, storage and disposal

Indication on the
display
The symbol shows.
The symbol flashes.
The symbol shows.
The symbol flashes.
The symbol flashes
quickly.
The symbol flashes.
The symbol flashes
quickly.
The symbol shows.
The symbol shows.
The symbol flashes.
The symbol shows.
To safely attach the product for transport
Before you attach the product, you must read and
understand the safety chapter. Refer to
on page 87 .
Sound Cause
The drive of the blades is enga-
ged.
-
Incorrect start procedure. Refer
Start conditions on page 86 .
to
The parking brake engaged. Re-
To apply and release the
fer to
parking brake on page 93 .
Incorrect start procedure. Refer
-
Start conditions on page 86 .
to
Defective parking brake. Speak
to your Husqvarna servicing dea-
ler.
The operator presence control is
5 short disengaged when you try to start
sounds. the engine. Refer to
engine on page 91 .
Defective operator presence con-
- trol. Speak to your Husqvarna
servicing dealer.
5 short Servicing is necessary. Speak to
sounds. your Husqvarna servicing dealer.
1 short Low fuel. Refer to
page 90 .
sound.
-
The product is locked. Unlock
your product with Husqvarna
Connect.
-
WARNING: The parking brake is not
sufficient to lock the product during
transport. Attach the product tightly to the
load area.
To start the
To fill fuel on
Transport safety
844 - 002 -