Transportation, Storage And Disposal - Husqvarna BS 75 Operator's Manual

Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
WARNING:
the blade guard before transportation of the
product. Use protective gloves. The blades
are very sharp.
The wheels let you move the product manually for
shorter distances. Refer to
the wheels BS 75 on page 20 and To transport the
product on the wheels BS 110 on page 20 .
For longer distances, lift the product to move it or put the
product on a vehicle. Refer to
21 and To attach the product to a transportation vehicle
on page 22 .
• Be very careful when you move the product
manually or on surfaces with a slope. Small slopes
can result in a strong movement that is not possible
to brake by hand.
• Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
To transport the product on the wheels
BS 75
WARNING:
blades are very sharp.
1. Disconnect the power supply.
2. Attach the blade guard.
3. Disengage the drive wheels. Refer to
disengage the drive wheels on page 21 .
4. Push the product slowly.
20

Transportation, storage and disposal

Be careful during
Remove the tool or attach
To transport the product on
To lift the product on page
Use protective gloves. The
To engage and
To transport the product on the wheels
BS 110
1. Disconnect the power supply.
2. Make sure that the tool is removed from the tool
holder.
WARNING:
The blades are very sharp.
3. Tilt the product until the foot support and the handle
are on the floor.
4. Loosen the 2 rubber clamps (A) and move the
transport wheel forward.
B
5. Install the locking pins (B) for the transport wheel on
the right and the left side.
6. Disengage the drive wheels. Refer to
disengage the drive wheels on page 21 .
Use protective gloves.
A
To engage and
1804 - 001 - 06.05.2022