R&S TSMA-BP Getting Started page 14

®
R&S TSMA-BP
Connecting the R&S TSMA-BP Battery Pack Unit with R&S TSMA
1 = R&S TSMA Base Unit
2 = R&S TSMA-BP Battery Pack Unit
3 = Lock (front side)
4. Via the cable (3), you have to connect the DC IN connector on the R&S TSMA
(1) with the TSMA connector (7 pins) on the R&S TSMA-BP Battery Pack Unit
(2).
Figure 4-6: Cabling of R&S TSMA with R&S TSMA-BP Battery Pack Unit
1 = DC IN Connector of R&S TSMA Base Unit
2 = TSMA Connector R&S TSMA-BP Battery Pack Unit
3 = Interconnection Cable (R&S TSMA Base Unit <-> R&S TSMA-BP Battery Pack Unit)
Note: The Interconnection cable (3) is included in the delivery package.
The cable plugs are marked at both sides with a red spot.
Figure 4-7: Cable
Connected at the DC IN (1) of the R&S TSMA, this red spot must face
upwards, at the TSMA connector (2) of the R&S TSMA-BP Battery Pack Unit
it must face downwards.
Getting Started 1177.5885.02 ─ 05
Preparing for Use
14