R&S TSMA-BP Getting Started page 18

®
R&S TSMA-BP
● The battery state is displayed in the web interface of the R&S TSMA. For
details, refer to "R&S TSMA Autonomous Mobile Network Scanner - User
Manual" (R&S No. 1177.5610.02).
● The battery status is displayed via the two LEDs on the rear side of the R&S
TSMA-BP Battery Pack Unit.
Figure 5-2: R&S TSMA-BP Battery Pack Unit - Status LEDs
1 (P501) = Status LED for battery 1
2 (P500) = Status LED for battery 2
Table 5-1: R&S TSMA-BP Battery Pack Unit LED states and their meaning (LED 1 and LED
2)
Color
---
blue
orange
red
green
green
red
white (RGB)
Getting Started 1177.5885.02 ─ 05
State
OFF
ON
ON
ON
ON
BLINKING (0,5 Hz)
BLINKING (0,5 Hz)
BLINKING (0,5 Hz)
Comment
BAT 1/2 not present
battery charge 100 - 50 %
battery charge 10 - 50
battery charge < 10 %, buzzer alarm
on mainboard
For R&S TSMA Firmware <
03.00.11.00
battery charged
For R&S TSMA Firmware ≥
03.00.11.00
battery charging / external DC con-
nected
For R&S TSMA Firmware <
03.00.11.00
battery charging / external DC con-
nected
For R&S TSMA Firmware ≥
03.00.11.00
battery charged
battery error
Busy (Initialization / communication)
Operation
18