Command access PD10-UL-M Kit Insert Instructions page 5

Installation Instructions
7.
Remove ASSEMBLY FROM BASE RAIL AND REMOVE TOP
ROLLER PINS
9.
Remove pin from connecting rod for RIM. For CVR skip
this step.
11.
Confirm which back activating bracket you have and follow below guide.
•
U S C U S T O M E R S U P P O R T 1 - 8 8 8 - 6 2 2 - 2 3 7 7 | W W W . C O M M A N D A C C E S S . C O M | C A C U S T O M E R S U P P O R T 1 - 8 5 5 - 8 2 3 - 3 0 0 2
3/4
Cut down
8.
REMOVE DOGGING ASSEMBLY FROM BASE RAIL
10.
CVR - Remove connecting rod assembly by pulling
away from device housing.
Cut
• Good!