Installation
Fit the screws loosely through
hinges at the top and bottom.
Refit the appliance door and then
tighten the screws, first at the bot-
tom, then at the top.
Replace the top covers and and
click them into place.
Replace the bottom cover and
click it into place.
72
18
Check that the wine conditioning unit
is standing securely in the niche and
that the door closes properly.
Installing the wine conditioning
unit
Before installing the wine condition-
ing unit
Take any accessories out of the appli-
ance.
Remove the cable clip from the back
of the appliance (depending on
model).